In Nokia phones, you can only 3x enter the code by keypad, if someone entered error codes use the: Nokia BB5 Utility. This may be necessary when we have blocked counter input.

In case that the counter is locked you can use a USB cable to enter code. If the code is entered, the message 'You can not undo restriction' This means that the counter is locked. You have only 3 attempts at entering the code. Lucifer full mp4 web series download in hindi Below you can see an example result of the data read from the phone. There are 3 files, we are interested in one, which name has the serial number of your nokia with the extension ' bcl ', for example.

Nokia C-3 is expected to fully boot up the phone by the user red checkmark. N the data reading should be automated to the end, or eg. Only the description of the main window.Īfter USB cable is connected, the program continues reading data and depending on your phone model eg.

As you can notice there is no longer a separate window that shows actions required by the program as described in Section 4. After while, you will be asked to repeat the sequence from step 4 disconnect the cable, remove the battery - insert the battery, connect the cable - a red check mark. If you succeed to connect the cable program will starts reading the data needed to unlock, wait a while, in according to message 'wait'. If you unlucky to attached phone to the USB cable within those 20 seconds counter is in the lower left corner of the window - the whole procedure will need to be repeated. If the drivers were installed correctly you will get the information that the program merged with the NOKIA marked in red message. What you have to do to read the part of data which is necessary to remote calculation of the unlocking code for Nokia S元 protected phones?

Nokia bb5 sl3 unlock code generator